Clear-Com Eclipse-Omega - Manual (Page 359)

Clear-Com
Eclipse Configuration Software Instruction Manual 1 0 - 9
From one frame click and hold down the mouse button in the diamond
shape next to the required trunk, drag across to the second frame and
drop on the diamond shape next to the required port.
Repeat this procedure for each required trunk.
Figure 10-11: Trunk Connections
• Select the ‘Apply changes To System’ link in the System menu to
apply the configuration changes.
• Open the File menu and select ‘Save project’ or ‘Save Project As’ to
save the new system configuration.
• Select the ‘Hardware’ menu and select ‘Cards and Ports’ to check the
configuration and confirm that the corresponding configuration has
been allocated to the trunks. This can be seen from the advanced
settings for the trunks.
Note: User-configured trunk labels are ignored in online mode
and the default labels should be accepted.
Figure 10-12: Trunk Configuration