Clear-Com Eclipse-Omega - Manual (Page 144)

Clear-Com
Eclipse Configuration Software Instruction Manual
5 - 3 4
Diagnostic Menu Access
Allow access to the panel diagnostic menu via the local menu option.
This allows some panel information to be displayed and access to
panel reset and telephone line release functions. Access may be
enabled for all users (True), denied to all users (False) or controlled by
the PIN number. Select the option and click on the arrow to open the
drop-down menu. Select the required access.
Note: Only on V-Series panels.
Allow Access to Soft Mode
Allow the panel to be switched into ‘Soft Mode’ via the local menu
option so that the keys can be programmed locally instead of only
being set centrally by ECS.
Note: Only on PD4224, PD4212 and PD4222 panels.
Allow Dial Mode Access
Allow the panel to dial out on a phone line using a preset key.
Note: Only on PD4224, PD4212, PD4222, I-Station, ICS 2003
panels.
Enable Assignment as a Listen
Allow the port to be assigned locally via Soft Mode as listen key by
another panel. If it is set to False it will prevent a Listen key being
assigned to the panel.
The default is True.
Note: This functionality only takes effect when making
assignments on a 4000 panel, V-Series panel or a Concert
Panel.
Enable Assignment as Talk
Allow the port to be assigned locally via Soft Mode as talk key by
another panel. If it is set to False it will prevent a Talk key being
assigned to the panel.
The default is True.
Note: This functionality only takes effect when making
assignments on a 4000 panel, V-Series panel or a Concert
panel.
Fast Key Assign
Enables the panel for local fast key assign. This facility allows the
panel operator to locally assign panel keys to local or remote ports by
direct input of the port number. The panel operator can also assign