Clear-Com Eclipse-Omega - Manual (Page 123)

Clear-Com
Eclipse Configuration Software Instruction Manual 5 - 1 3
• Telephone (TEL-14)—When the {Telephone} port function is
selected, the port is configured to operate a TEL-14 Telephone
Interface. The call signal output is used as a request from the
Eclipse System for the interface to go off-hook. A call signal sent
from the TEL-14 interface to the Eclipse indicates that the line is
ringing or that the line is off-hook.
• Trunk - An MVX-16A port is configured to function as a trunk line to a
remote matrix. The connection must be configured in the ‘System’
screen and cannot be configured from the Matrix Hardware setup.
The ‘Linking Options’ shown under the ‘Advanced Settings’ menu is
for information only.
• V12LD - The port is configured to drive a V-Series panel with nine
pages of 12 lever keys allowing up to 108 connections including
reply.
• V12PD - the port is configured to drive a V-Series panel with nine
pages of 12 pushbuttons allowing up to 108 connections including
reply.
• V12RD - the port is configured to drive a V-Series panel with nine
pages of 12 rotary encoders allowing up to 108 connections
including reply.
• V24LD - the port is configured to drive a V-Series panel with nine
pages of 24 lever keys allowing up to 216 connections including
reply.
• V24PD - The port is configured to drive a V-Series panel with nine
pages of 24 pushbuttons allowing up to 216 connections including
reply.
• V24RD - The port is configured to drive a V-Series panel with nine
pages of 24 rotary encoders allowing up to 216 connections
including reply.
• V12LDD - the port is configured to drive a V-Series lever key desktop
panel with nine pages of 12 lever keys allowing up to 108
connections including reply.
• V12PDD - the port is configured to drive a V-Series pushbutton
desktop panel with nine pages of 12 pushbutton keys allowing up to
108 connections including reply.
• V12RDD - the port is configured to drive a V-Series rotary desktop
panel with nine pages of 12 rotary encoder keys allowing up to 108
connections including reply.
Additional panels with limited support:
• PD4294E - The Eclipse Configuration Software (ECS) software does
not directly support the PD4294E panel. In order to configure an
PD4294E panel the port is configured to drive a 4000 Series II
PD4224E panel with only the rightmost 16 pushbuttons being used.