Clear-Com Eclipse-Omega - Manual (Page 252)

Clear-Com
Eclipse Configuration Software Instruction Manual
6 - 2 0
ASSIGNING A CONCERT USER TO AN IVC-32 PORT
A Concert user can be associated with an IVC-32 port by dragging and
dropping a Concert user entry onto a port on an IVC-32 card. If the
port is already in use the current entry is removed and replace by the
Concert user. Concert clients can also be moved between ports on an
IVC-32 card by dragging and dropping.
The IVC32 port's talk label, listen label and description fields are
updated with the information received from the EMS (Concert) server.
The connection ID is set as follows:
• If the Concert User already has a connection ID this is assigned to
that port, otherwise a new unique connection ID is created and
used by both concert user and port. One special case is when the
eclipse ID is already in use, a new unique ID will be created for
both concert user and port.
• By default a connection password is NOT set; a password is only
used if the port has a password explicitly set on it in Matrix
Hardware for added security. The password can be set in ‘IP
Panel Settings’ under ‘Advanced Settings’.
• These changes are sent to the EMS server in real time during the
drag and drop operation so no separate action is required to
update the Concert server.