Clear-Com Eclipse-Omega - Manual (Page 196)

Clear-Com
Eclipse Configuration Software Instruction Manual
5 - 8 6
The recommended use of this feature is that all Party Lines are
configured and then a download to all frames is carried out. The
Production Maestro software can then be used to manipulate these
Party Lines in an online fashion.
PARTY LINE ATTACHED CONTROLS
Controls can be attached to Party Lines that will allow a Route, Relay
or Speed Dial to be activated via a secondary action.
1. Open the Party Line screen by selecting the ‘Party Lines’ link on the
Configuration menu.
2. Create a Party Line or select a Party Line that was been previously
created.
3. Expand the ‘Attached Control’ item in the ‘Properties’ window.
4. Select the ‘Secondary Action’ item in the ‘Attached Control’ list.
5. Select the drop down arrow and select the required control.
Figure 5-19: Party Line Attach Control Screen
PARTY LINE BASIC SETTINGS
The ‘Basic Settings’ list displays the fixed information about a Party
Line and can be used to edit the Party Line description, Talk and Listen
Aliases and Talk and Listen labels and Shared Partyline.
To enable/disable Basic Settings
1. Open the Party :Line screen by selecting the ‘Party Lines’ link on the
Configuration menu.
2. Create a Party Line or select a Party Line that was been previously
created.
3. Expand the ‘Basic Settings’ item in the ‘Properties’ window.