Clear-Com Eclipse-Omega - Manual (Page 304)

Clear-Com
Eclipse Configuration Software Instruction Manual
7 - 5 2
Figure 7-62: Drag Label to Port
5. Drag the mouse curser up the screen into the mimic area and
position it over the display area above/below the required selector.
6. To place the Label in the required position left click the mouse and
the Label will drop into position.
7. Repeat for all required Label programming.
RE-ASSIGNMENT OF LABELS
To re-assign a Label:
1. Select the required Panel and locate the Label that is required to be
re-assigned.
2. To select the Label place the mouse curser over the Label.
3. Left click and hold down the mouse button.