Clear-Com Eclipse-Omega - Manual (Page 76)

Clear-Com
Eclipse Configuration Software Instruction Manual
3 - 2 2
• Diagnostic Menu Access
The PIN protected menus on ICS-2003 are:
• Local Configuration
• System Configuration
• Maintenance
Features Passcode
Allows a 16 digit passcode to be entered which allows the licensable
options of Wireless Beltpacks and Production Maestro to be enabled.
Passcodes to enable licensable options are obtained from Clear-Com.
Please contact Clear-Com sales or your distributor for further
information.
If the passcode is changed an apply and red reset is required to
implement the change.
Wireless Beltpacks Setup
The wireless beltpacks tab allows the system identifier to be set up and
the DECT parameters for the beltpacks to be configured.
Note that in order to access the DECT configuration facility a password
is required. This is available from your Clear-Com supplier. Ask for
ECS-CEL.
Figure 3-26: Wireless Beltpacks Tab
To configure the DECT frequency click on the ‘Configure’ button. The
password input screen will be displayed.