Clear-Com Eclipse-Omega - Manual (Page 79)

Clear-Com
Eclipse Configuration Software Instruction Manual 3 - 2 5
If Tally Settings is set to Green then the i-Station panels flash dim
green at 4 Hz after reply and then release of the talk key if the option is
checked. V-Series panels show bright green solid after reply and then
release of the talk key.if this option is checked.
The default is for the option to be unchecked.
Rotary Encoders
This option applies to PD4222/4212 panels. If this option is checked,
when a user assigns a key onto a panel that has rotary encoders (i.e.
PD4212, PD4222), the rotary encoder associated with that key is
automatically populated with a listen to the newly assigned key
destination. Note that rotary encoder listens are not maintained when
moving keys with attached encoders but are deleted when the keys
are moved.
Note: This is different to ECS V4.0 where the assignment was
done at map build time, and the user could not see what was
happening.
Feedback Settings
If this option is enabled (box checked) the label of any Forced Listen
port will appear in the answerback stack of a panel that is listening.
The option is unchecked by default.
Reply Key
The Reply Key radio buttons select in which order incoming calls to a
panel are stacked on the Reply Key.
• If the ‘First caller’ option is selected then the calls are ordered on
the basis of “first in first out” so the reply key answers the calls in
the order they are received. I
• f the ‘Last caller’ option in selected the calls are ordered on the
basis of “last in first out” so the reply key answers the calls
starting with the most recent.
The default is the first call is answered first.