Clear-Com Eclipse-Omega - Manual (Page 168)

Clear-Com
Eclipse Configuration Software Instruction Manual
5 - 5 8
LINKING OPTIONS
Remote System
The remote system that the E1 or T1 trunk is connected to. Selecting
this option will display a list of remote systems that the trunk may be
connected to in order to select the target system. For a system to be
listed it must have been set up in ‘My Systems’ as linked to the current
matrix so that the hardware can be allocated.
CONFIGURING THE IVC-32 CARD
The IVC-32 card is designed to allow Eclipse matrices to be connected
to IP enabled V-Series panels or connected to Concert systems over a
normal LAN or WAN using IP.
ADDING AN IVC-32 CARD
To add an IVC-32 card open the Hardware menu and select the ‘Cards
and Ports’ link. Select the down arrow next to the ‘Show all cards’
field. A list is displayed, showing P1 & P2 main and backup processor
cards, then the ‘Not Configured’ slots where IVC-32 cards can be
configured.
Figure 5-28: Eclipse Empty Slots
Using the mouse, navigate to a required slot number then left click the
mouse button to select this slot. This action brings into focus the
‘Empty’ drop down list. From this list, select the down arrow, and then
select the IVC-32 card.