beautypg.com

Applies to, Panel options, Answerback auto clear time – Clear-Com Eclipse-Omega User Manual

Page 138: Display brightness, Applies to: -28, Panel options -28, Answerback auto clear time -28, Display brightness -28

background image

Clear-Com

Eclipse Configuration Software Instruction Manual

5 - 2 8

• No Function

• Mic On/Off

• Mute Mic Output to Frame

• Mic Off (Momentary)

• Answerback Talk Clear

• Studio Announce

• Speaker Off

• PTT Activate all Talk Keys

• Activate Talk Switch 1

• Activate Talk Switch 2

• Activate Listen Labels

• PTT Activate Two Way Radio Talk Keys

• Select Route (and controls)

The default setting is No Function.

Applies to:

On V12LD, V24LD, V12PD, V24PD, V12RD, V24RD, V12LDD,
V12PDD, R12RDD, ICS 2003, ICS 102, i-Station, ICS 52, ICS 62 and
ICS 92 and 4000 Series II panels.

Note: Logic Inputs 3 and 4 are only available on V-Series panels.

Logic inputs 3 is pre-assigned to Reply Key. Logic input 4
is not currently used.

PANEL OPTIONS

Answerback Auto Clear Time

The time interval for automatic answerback in seconds. To adjust the
time select the answerback time to display the slider and set the time
as required. The time is settable from 0 to 60 seconds. The default is
10 seconds.

Display brightness

Sets the display brightness on panels that have a suitable display. To
adjust the display brightness select the brightness box to display the
adjustment slider and use the mouse to drag the slider to the required
setting. The brightness is adjustable from 0 to 10. The default setting
is 0.

Note: Not available on Concert panel.

This manual is related to the following products: