Clear-Com Eclipse-Omega - Manual (Page 218)

Clear-Com
Eclipse Configuration Software Instruction Manual
5 - 1 0 8
Figure 5-37: Matrix Screen
1. From the telephones Advanced Setting screen select Assign DTMF
Codes to open the DTMF Assignment screen.
Figure 5-38: Single Digit DTMF Assignments
2. Select the desired destination label from the palette of available
destinations, at the bottom of the screen.
3. Find the desired code in the DTMF Codes column.
4. The columns to the right of the DTMF Codes column allow assigning
as many as three talk labels and one listen label for each key. Click
in the column for the desired type of label for the desired code: Talk
1, Talk 2, Talk 3, or Listen. The selected label will appear in the
desired cell. If this cell has already been assigned a label, the new
label will displace the old one.