Clear-Com Eclipse-Omega - Manual (Page 235)

Clear-Com
Eclipse Configuration Software Instruction Manual 6 - 3
Clicking on the menu button will open the menus associated with the
type of IP device associated with the pane.
Clicking on the discover button at the top left corner of the IP Panels
pane will cause the IP Manager to search for all the IP panels on the
network.
The IP Cards pane has a similar layout but does not have a discover
button. Instead the left-hand button on the header bar opens or closes
the list of IVC-32 cards detected in the current matrix.
Figure 6-4: IP Cards Pane
The left and right buttons on each IVC-32 card display are used to
open displays for the individual cards.
IP PANELS
Clicking on the ‘IP Panels’ discover button will cause ECS to search all
the systems on the network for IP enabled V-Series panels and display
all the panels detected as a list.
Figure 6-5: IP Panel List
The panels listed are color coded according to status. The color codes
are:
• Blue - panel has been discovered but does not have a login IP
address, User ID or password configured.
• Green - panel has been discovered and is logged in to the current
configuration.