Clear-Com Eclipse-Omega - Manual (Page 231)

Clear-Com
Eclipse Configuration Software Instruction Manual 5 - 1 2 1
Local Assignment
Click on the ‘Local Assignment’ entry to display the available options
for local key assignment. The options are to allow local key
assignment and to disallow local key assignment. If the local
assignment is allowed for the key then the beltpack key can be
assigned by updating the beltpack with key assignments uploaded
from the matrix via the ‘Upload’ control on the toolbar.
Interlock Group
The ECS user can assign several keys on a beltpack into a selector
group and restrict the group so that only one key of the group can be
activate at any one time. This function only refers to talk paths.
Note: For example if a beltpack had three keys programmed to
talk to a cameras 1 to 3 then by setting these into an
interlocked group only one camera key can be selected at a
time.
There are nine available interlocked groups to which the ECS user can
assign any or all beltpack keys.
To add a key to an interlocked group
1. From Panel Programming, select the beltpack.
2. Right click on the required key to display the key options list.
3. Select the ‘Interlock Group’ entry to display the interlock group
options list.
4. Select the required interlock group or ‘None’ if the key is not to be in
any interlock group.
5. The key may be added to other interlock groups as required.
6. The key interlock groups will be displayed in the key information
popup.