Listen again, Filter, Output area – Clear-Com Eclipse-Omega User Manual
Page 334: Main ls, Aux o/p, Matrix1, Matrix2, Hs1l, Hs1r, Hs2l
Clear-Com
Eclipse Configuration Software Instruction Manual
8 - 6
Listen Again
This input uses audio from the listen again facility.
FILTER
The filter column shows a graphic representing the type of audio
filtering that is being applied to the audio inputs. The graphic
represents the frequency profile of the input filters.
OUTPUT AREA
The top row of the output area lists all the outputs that may be
available in the configuration. All of the possible outputs are listed
below but some outputs may not be available in specific
configurations.
Main LS
This outputs audio to the main panel loudspeaker.
Aux o/p
This outputs audio to the auxiliary loudspeaker via the auxiliary audio
connector.
Matrix1
This output sends either mono audio to the matrix via the analogue
matrix connection or one channel of stereo audio to the matrix via the
AES3 digital connection.
Matrix2
This output sends one channel of stereo audio to the matrix via the
AES3 digital matrix connection. This output is only available if the
AES3 digital option card is fitted.
HS1L
This output sends audio to the main panel headset left ear.
HS1R
This output sends audio to the main panel headset right ear.
HS2L
This output sends audio to the second headset left ear via the auxiliary
audio connector.