Clear-Com Eclipse-Omega - Manual (Page 279)

Clear-Com
Eclipse Configuration Software Instruction Manual 7 - 2 7
RE-ASSIGNMENT OF LABELS
Figure 7-33: Reassign Label Screen
To re-assign a Label
1. Select the required port and locate the Label that is required to be
re-assigned.
2. To select the new Label and place the mouse cursor over the Label.
3. Left click and hold down the mouse button.
4. Whilst holding down the mouse button drag slightly down the mouse
until the Label is free from the display.
5. Position the Label over the new position and release the mouse
button to drop the label into the new position.