beautypg.com

Programming remote labels, Programming remote labels -10 – Clear-Com Eclipse-Omega User Manual

Page 360

background image

Clear-Com

Eclipse Configuration Software Instruction Manual

1 0 - 1 0

Switch configurations and confirm the trunks have been allocated the
corresponding configuration.

Figure 10-13: Frame Reset

When changing the trunking information between frames all of the
frames in the linked set should be reset. The option to reset frames is
available from the download dialogue.

PROGRAMMING REMOTE LABELS

Programming remote labels onto Panels is conducted by firstly
ensuring that the currently active configuration is the configuration
where the programming of the remote labels is required. Next select
‘Panels’ link from the ‘Configuration’ menu.

From the Panel Programming area of the screen select the required
panel to be programmed by either selecting the panel from the drop
down list or cycling through the panels by selecting the left or right
arrows.

Figure 10-14: Panel Labels

This manual is related to the following products: