Clear-Com Eclipse-Omega - Manual (Page 345)

Clear-Com
Eclipse Configuration Software Instruction Manual 9 - 3
• Merge Down - merge the current ECS configuration down to the
matrix; the ECS configuration will take precedence.
• Merge Up - merge the current matrix configuration up to ECS; the
matrix configuration will take precedence.
• Visual Merge - merge the configurations and offer the operator the
option to decide which configuration takes precedence in the
event of a conflict.
The state of Online mode is shown by the background color of the
menu panel.
Normally the menu panel background color is charcoal; when the
Online button is selected it will initially turn red while ECS contacts the
matrix and uploads the current configuration (this phase may be short
enough not to be seen). Once the matrix has been contacted the
menu panel background will turn amber.
If the name of the configuration map on the matrix is different to the
configuration currently open in ECS Online mode will display an error
message.
Figure 9-3: Online Configuration Name Error
The user may continue with the operation by clicking on the ‘Yes’
button but it is generally not advisable. If the user does continue with
the operation further errors may be reported.
ECS will then compare the matrix configuration with the current ECS
configuration; during this operation the menu background color is
amber. If inconsistencies are found between the current configuration
in ECS and the information from the matrix informatory messages will
be displayed.