Clear-Com Eclipse-Omega - Manual (Page 270)

Clear-Com
Eclipse Configuration Software Instruction Manual
7 - 1 8
Clear
Clicking on the ‘Clear’ button on the Panel Programming toolbar will
clear all the labels from the current panel including shift pages but
excluding any attached expansion panels.
Audio Mixer
Displays the audio mixer panel that allows the levels of individual
crosspoints to be adjusted interactively. This facility can only be used
with V-Series panels. See chapter 7 for details of the Audio Mixer.
Identify Panel
Selecting the ‘Identify Panel’ button on the panel programming toolbar
will cause the panel currently being edited to flash the panel buttons or
LEDs red and display ‘IDENTIFYME’ in the bottom left display. In
order to use this facility monitoring must be enabled using the ‘Monitor’
button on the ECS toolbar.
This facility is only available for V-Series panels; the ‘Identify Panel’
button will be greyed out for other panel types.
CONCERT PANEL PROGRAMMING
A Concert panel is a virtual panel (or soft panel) that runs on a PC and
provides the same functionality as a normal hardware panel such as a
V-Series panel. Concert panels can connect to an Eclipse matrix via a
Concert server.
Concert panel keys act as pushbuttons rather than lever keys and are
operated using a mouse or other pointing device. Concert panels do
not support any expansion panels.
The following section covers the programming of Concert panels.
Select ‘Panels’ from the Configuration menu to display the panel
options toolbar and select the panel from the drop-down list or the ‘>’
icons to step through the list of panels.