Clear-Com Eclipse-Omega - Manual (Page 207)

Clear-Com
Eclipse Configuration Software Instruction Manual 5 - 9 7
CONTROLS
Relay options, routes and speed dials can only be accessed by being
first placed inside a control. A control can then be placed on a panel
key for activation.
The ‘Controls’ link on the Configuration menu provides a screen
location where the use of controls are used for association with
attachments to allow a label to activate a route, relay or speed dial for
the currently required control.
Figure 5-27: Setup Menu
To access the Control Manager select the ‘Controls’ link from the
Configuration menu.