Clear-Com Eclipse-Omega - Manual (Page 230)

Clear-Com
Eclipse Configuration Software Instruction Manual
5 - 1 2 0
Activation
The activation option allows the key type to be configured to determine
how the key will behave when activated via the pushbutton. To set the
key activation type right click over the required key to display the
options menu and then select the ‘Activation’ item to display the
activation options.
Figure 5-52: Beltpack Key Assignment Menu
The activation options are: Talk, Listen, Talk and Listen, Talk and
Forced Listen or Dual Talk and Listen.
• Talk sets a talk from the beltpack to a destination with no
automatic listen to the destination.
• Listen sets a key to listen to the source without talking to the
destination at the same time. Use as a monitor key (press the
volume level up/down buttons under the display to increase
listen level).
• Talk and Listen sets a talk key with listen (press the volume
level up/down buttons under the display to increase or mute
the listen level).
• Talk and Forced Listen sets a talk key with permanently made
listen (press the volume level up/down buttons under the
display to increase or mute the listen level).
• Dual talk and Listen sets a Dual talk and listen key. This
makes the pushbutton activate a Talk and Listen on a press
and hold or latch a Listen with a short press and release (less
than 200ms) on the same pushbutton.