Figure 6-9 editing ip panel settings -6 – Clear-Com Eclipse-Omega User Manual
Page 238
Clear-Com
Eclipse Configuration Software Instruction Manual
6 - 6
• IP Address - the IP address of the panel.
• Netmask - the subnet mask for the network the panel is on.
• Gateway - the IP address of the gateway to be used when
connecting to the matrix.
• DNS - the IP address of the Domain Name Server to be used by
the panel to obtain an IP address automatically if DHCP is
enabled.
Clicking on the ‘Edit’ button will enable the IP settings to be changed
from the IP Manager.
Figure 6-9: Editing IP Panel Settings
When the edits are completed click on the tick button to accept the
changes or the cross button to cancel the changes.
If a parameter is set to an invalid state, such as part of an IP address
being set to a number greater than 255 the error will be flagged by a
red border around the item when attempting to save it. The invalid
entry will not be sent to the panel and the entry will be reset to the
original value if edit mode is cancelled.