Clear-Com Eclipse-Omega - Manual (Page 112)

Clear-Com
Eclipse Configuration Software Instruction Manual
5 - 2
The ‘Controls’ link may be highlighted if:
• There are speed dials but no controls.
MATRIX HARDWARE
The ‘Hardware’ link in the main menu is utilized to build up the
configuration of the Eclipse system. The Eclipse system is usually a
mixture of hardware items and port functions. Hardware items can
consist of configuration cards, interface cards, ports (panels or
Interfaces) and RLY-6/GPI-6 modules. Port functions also use this link
and provides access to the advanced settings for ports and also where
local preferences are configured.
Note: In order for ECS to build a map at least one MVX-A16 or
IVC-32 card must be configured in an Omega or Median
matrix. If no cards are fitted the first available slot should
be configured in ECS as if an MVX-A16 card was present in
order for the map to build.
FONTS
A number of fonts are supported by Eclipse systems allowing suitable
panels to display labels in Latin and certain non-Latin scripts. The
fonts supported by Eclipse systems are described below with the panel
support.
Eclipse V5 release onwards has additional font support for the
V-Series panels. The details of the fonts supported and any
limitations are described below.
1. Basic Latin. The backslash is a Yen character. This is a
size-maximized font (no descenders, lower-case characters are not
relative in size to upper-case characters). This covers Unicode 32 to
127 (decimal), 0x20 to 0x7F (hex). The V-Series panel display will
support ten characters.
2. Cyrillic. This is a normal, relatively-sized font. The V-Series panel
display will support ten characters. Covers Unicode 1024 to 1279
(decimal), 0x400 to 0x4FF (hex) with some missing characters.
3. Hiragana. The V-Series panel display will support five characters.
This covers the codepoint range 12352 to 12447 (decimal), 0x3040
to 0x309F (hex).
4. Full-width Katakana. The V-Series panel display will support five
characters as this is a normal wide font. This covers the codepoint
range 12448 to 12543 (decimal), 0x30A0 to 0x30FF (hex) with some
missing characters.
5. Kanji. There are about 17,000 out of the 21,000 characters. The
V-Series panel display will support five characters. This covers the
codepoint range 19968 to 40895 (decimal), 0x4E00 to 0x9FBF
(hex).