Clear-Com Eclipse-Omega - Manual (Page 39)

Clear-Com
Eclipse Configuration Software Instruction Manual 1 - 5
Rear-Panel Connectors
A matrix connects to remote devices such as intercom panels,
interfaces, general purpose inputs and outputs, local area networks, a
computer, and other matrices through its rear-panel connectors.
The rear-panel RJ-45 sockets, sometimes called “ports”, connect the
matrix to intercom panels, beltpack antennas, Concert servers, other
matrices and interfaces with shielded category 5 (CAT-5) cable.
ECLIPSE CONFIGURATION SOFTWARE (ECS)
The Eclipse Configuration Software (ECS) controls the operation of the
system’s connected audio devices via a system map downloaded to
the matrix by ECS.
The system is designed in a “star” configuration, in which each
member of the system connects directly to the matrix rather than to
each other. Audio signals are routed through the central matrix and out
to the connected audio devices by the matrix under control of the map
created by ECS.
ECS can also be used to monitor the matrix for faults and log errors to
a logfile for analysis.