Clear-Com Eclipse-Omega - Manual (Page 244)

Clear-Com
Eclipse Configuration Software Instruction Manual
6 - 1 2
administrator should check with the network administrator or IT to
obtain a port number to use.
IP Address
The IP address of the IVC-32 card that the panel will try to log in to.
This will be the internal IP address if the panel is on the same LAN, or
the external IP address if not.
Subnet Mask
Subnet mask used by the IVC-32 card to define the address range the
card can access. Commonly set to 255.255.0.0 or 255.255.255.0.
Default Gateway
The address of the gateway to be used to communicate with external
devices such as IP panels and Concert clients over the IP network.
External IP Address
This checkbox enables editing of the external IP address and port
number below the checkbox.
IP Address
The external IP address that can be used to communicate directly with
the IVC-32 card itself rather than the matrix via the IVC-32 card. This
address is not used by IP panels etc.
IP Port
The external IP port used when communicating directly with the
IVC-32 card using the external IP address.
When the edits are complete click on the tick button to save the
changes. Alternatively click on the cross button to discard the
changes. As soon as the changes are confirmed ECS will send them
to the IVC-32 card.