Clear-Com Eclipse-Omega - Manual (Page 332)

Clear-Com
Eclipse Configuration Software Instruction Manual
8 - 4
RESTORE TO DEFAULT VALUES
Click on this button to reset all the mixer settings for the current layout
to their default values. The user will be asked to confirm the request.
Click on ‘Yes’ to replace the current settings with the default settings or
‘No’ to cancel the action. This option can also be used when in online
mode.
SAVE TO FILE
Saves the audio mixer settings to a file. The file save dialogue will
request a file name. If no filename extension is given it will default to
“amc”. This feature is available when in online mode.
LOAD FROM FILE
Loads audio mixer settings from a file previously created by the file
save function. If this function is used in online mode the settings in the
file will be sent straight to the panel.
LAYOUT SETTINGS
Clicking on this button displays a drop-down menu of layout options.
These options configure the audio mixer for V-Series panels that have
their audio connected in different ways such as the Matrix port, the
25-way D-type auxiliary audio and the AES3 interface.
Note: The layout cannot be changed while in online mode.
Layout Basic Settings
This configures the audio mixer for the panel when using the RJ-45
analogue matrix connection.
Layout Basic Settings using D25
This configures the audio mixer for use with the analogue RJ-45 and
auxiliary audio connectors.
Layout Binaural coax/AES
This configures the audio mixer for use with the AES3 digital option
card. The AES3 option card has both RJ-45 and coax connectors and
will auto-detect which is in use. This option will apply regardless of
which connection on the AES3 card is used.