Clear-Com Eclipse-Omega - Manual (Page 326)

Clear-Com
Eclipse Configuration Software Instruction Manual
7 - 7 4
LATCH DISABLE
This function prevents talks to any label from latching. If a
latch-disabled label is assigned to a selector key, the key can only
access the label for as long as the operator physically holds down the
key. A latch-disabled port’s label can be included in a fixed group or
party line without automatically latch disabling the entire fixed group or
party line.
LOCAL ISO
This function enables a panel or interface as a local ISO destination of
the source panel or interface. When the source activates a talk to any
of its local ISO destinations, that talk is a private, two-way path. All
other talk paths from the source are interrupted. All existing talk and
listen paths between the source and the destination are interrupted,
except for other ISO talk paths. When the source terminates the talk,
the destination’s audio paths resume; when all ISO paths to the
destination are deactivated, the destination’s audio paths return to
their previous states. If more than one panel activates an ISO path to
the destination, both sources can talk and listen to the destination. For
ISO talks to also interrupt listens at the source, check the ISO
Interrupts All Other Listens box in the Matrix Frame Preferences ‘ISO
and IFB’ tab.
Note: If the destination of an ISO is a panel then ‘Eavesdropping’
must be enabled in Global Settings (Advanced Settings
section) in order to activate the panel microphone if it is not
already activated. If the destination is not a panel but a
device such as a 4-Wire port Eavesdropping does not need
to be enabled for the destination device.
LOCAL IFB
This function enables a panel or interface as a local IFB destination of
the source panel or interface. When the source activates a talk to one
of its local IFB destinations, that talk is a private, one-way path. All
existing talk and listen paths to the destination are interrupted, except
for other IFB talk paths. When the source terminates the talk, its audio
paths resume; when all IFB talks to the destination are deactivated, the
destination’s audio paths return to their previous states. If more than
one panel activates IFB talks to the same destination, both sources will
be heard by the destination. For IFB talks to also interrupt talks at the
source, select the IFB Interrupts All Other Talks From Source Panels
button in the ‘Matrix Frame Preferences’ screen from the System
screen.
Note: The level of the interrupt can be set using Local Advanced.