Clear-Com Eclipse-Omega - Manual (Page 131)

Clear-Com
Eclipse Configuration Software Instruction Manual 5 - 2 1
Note: Only on Panel Aux.
Port Number
The port number the device is configured on.
Note: Not available on Concert panels.
Shared Port
Setting the port as shared reserves the port for trunked applications.
Note: Not available for Aes Mono and Panel Aux.
Split Label
If split label is set only the first five characters of a talk label and the
last five characters of a listen label are shown. If split label is not set all
ten characters are shown for talk and listen labels (on panels that
support ten characters).
Talk Label
The Talk Label specified in the port settings table.
Applies to:
The Description, Engineer Comments, Listen Label, Port Number and
Talk Label fields are available for all port devices unless noted
otherwise.
GLOBAL SETTINGS
The Global settings are the Global Advanced options, where the
following options are available: Auto Listen, Auto Signal,
Eavesdropping, Global IFB (with IFB attenuation), Global ISO, In Use
Tally, Latch Disable and Panel Connected Tally.
Auto Listen
This function enables a port for auto-listen. When a panel activates a
talk to a destination that is configured for auto-listen, a listen path from
that destination back to the source panel will also be activated
automatically for the duration of the call. In this way, the source
receives audio from the destination without the destination having to
specifically activate a talk back to the source. The default setting is
disabled.
Generally used on interfaces and 4-wires.
Note: For Auto Listen to work correctly on external 4-Wire ports
the MVX-A16 port must have the destination Tx/Rx looped
together.