Setting up a new matrix, Adding a discovered matrix, Setting up a new matrix -9 – Clear-Com Eclipse-Omega User Manual
Page 63: Adding a discovered matrix -9, Figure 3-6 blank matrix screen -9
Clear-Com
Eclipse Configuration Software Instruction Manual
3 - 9
SETTING UP A NEW MATRIX
Once a new project has been created matrices can be added to the
project in two ways; either by adding matrices that have been
discovered by ECS or by creating new matrices.
Figure 3-6: Blank Matrix Screen
Click on the Matrix IP Address box to edit the default address
displayed then click on the ‘Configuration Manager’ button to open the
project configuration setup.
ADDING A DISCOVERED MATRIX
This approach assumes that the matrix or matrices has an ethernet
address set up that is accessible to the ECS PC (see “Ethernet
Connection” on page 3-4).
1. Open the ‘System’ menu.
The systems screen is displayed. If there are active matrices on the
network ECS will discover them and display a list of these matrices
in the centre of the screen.