Clear-Com Eclipse-Omega - Manual (Page 339)

Clear-Com
Eclipse Configuration Software Instruction Manual 8 - 1 1
CROSSPOINTS
The crosspoint area of the audio mixer displays all the crosspoints
available for the current configuration and the status of the crosspoint.
Each crosspoint allows individual setting of the input and output audio
between the audio source in the input section and the Asia destination
in the output section. Each crosspoint is displayed as a dial with color
coding to show the status of the crosspoint. The color codes are:
• Grey - crosspoint is muted so no audio passes through the
crosspoint.
• Blue - audio level gain is set to 0dB or controlled by a volume
knob.
• Green - audio level is reduced in the crosspoint (gain level is
negative e.g. -3dB).
• Red - audio level is increased in the crosspoint (gain level is
positive e.g. +3dB).
• Blank - no crosspoint.
The center of the dial is also color coded when appropriate to indicate
whether the audio level is being controlled by software only or by the
panel volume controls. The settings are:
No colored center - audio levels are set in software only.
White center - audio level is set by main volume control knob.
Mauve center - audio level is set by auxiliary volume control knob.
Figure 8-8: Audio Mixer Crosspoint
Right clicking on a crosspoint dial will display a list of options for setting
the crosspoint.