I-station programming, Assigning labels, I-station programming -25 – Clear-Com Eclipse-Omega User Manual
Page 277: Assigning labels -25, Figure 7-31 label assign screen -25
Clear-Com
Eclipse Configuration Software Instruction Manual
7 - 2 5
I-STATION PROGRAMMING
This section deals with programming i-Station main panels and
i-Station expansions panels which are programmed in exactly the
same way. The v-Station panels which may also be attached to
i-Stations as expansion panels are non-programmable.
ASSIGNING LABELS
Figure 7-31: Label Assign Screen
To assign a label to a given selector
1. Locate the mimic of the panel to programme by either using the
scroll arrows or the drop down list box from the middle area of the
screen.
2. Locate the Talk or Listen Label (Red or Green columns) required to
be programmed onto the panel from the bottom left area of the
screen.
3. To select the required Label, drag the mouse cursor until it is
positioned above either the Talk or Listen label. When the mouse is
dragged over any Label, the Label highlights to provide the user an
indication that this is the current Label.
4. Once the cursor is positioned over the required Label, left click the
mouse button to select the Label.