Clear-Com Eclipse-Omega - Manual (Page 415)

Clear-Com
Eclipse Configuration Software Instruction Manual 1 2 - 3 3
CONFIG CARD FIRMWARE UPGRADE
Config cards can be upgraded using ECS or using the S4 driver. Both
methods are described below.
USING ECS
Required Files
Binary File Required
Select the *.4kr file located in the distribution media.
Software Required
Run ECS - V5.2 version.
Instructions
Place the V5.2 Configuration Card Application code *.4kr file in a
location that ECS can access.
Start and log onto ECS, load and activate a configuration for the Matrix
that is to be upgraded.
Under the File menu select Update Firmware and the Update
Firmware wizard will be started.
Figure 12-45: Start of ECS Upgrade Dialogue
Click on the ‘Next’ button to display the download type select dialogue.