Clear-Com Eclipse-Omega - Manual (Page 183)

Clear-Com
Eclipse Configuration Software Instruction Manual 5 - 7 3
Figure 5-5: Fixed Group Global Settings
FIXED GROUP SOFT MODE OPTIONS
The ‘Soft Mode Options’ list display items which relate to the Soft
Mode available on certain panel types. Currently this is restricted to
Sort Groups.
To enable/disable Soft Mode Options
1. Open the Fixed Groups screen by selecting the ‘Fixed Groups’ link
on the Configuration menu.
2. Create a Fixed Group or select a Fixed Group that was been
previously created.
3. Expand the ‘Soft Mode Options’ item in the ‘Properties’ window.
4. Select the required options:
• Default Assign as Talk and Forced Listen. When true the default
for a key assigned to this label is Talk and Forced Listen.
• Enable Assignment as Listen. This must be enabled to allow a
4000E or V-Series panel operator to assign a listen key to this
label. If it is not enabled a 4000E/V-Series panel operator cannot
assign a listen key to the label.
• Enable Assignment as Talk. This must be enabled to allow a
4000E or V-Series panel operator to assign a talk key to this label.
If it is not enabled a 4000E/V-Series panel operator cannot assign
a talk key to the label.