Clear-Com Eclipse-Omega - Manual (Page 117)

Clear-Com
Eclipse Configuration Software Instruction Manual 5 - 7
Figure 5-4: Eclipse Empty Slots
Using the mouse, navigate to a required slot number then left click the
mouse button to select this slot. This action brings into focus the
‘Empty’ drop down list. From this list, select the down arrow, and then
select ‘MVX-A16’ by left clicking the mouse button over the text. This
action automatically adds 16 Ports ready to be configured. Repeat this
step for the number of required MVX cards.
Note: MVX cards must be fitted into the Eclipse Frame with no
empty slots left between the cards.
REMOVING AN MVX-A16 CARD
To remove an MVX-A16 card from the configuration, select the Matrix
Hardware link from the Eclipse menu. Select the ‘Show all cards’
down arrow (‘Show all cards’ may not be the current selection as
another slot may be selected) by left clicking the mouse button. Move
the mouse up or down the list to the slot number of the MVX-16A card
required to be deleted. Select the MVX-16A card by left clicking the
mouse button. The MVX-A16 drop down list should now come into
focus. Select the drop down arrow then select Empty using the left
mouse button. A warning dialogue box appears. Select ‘Yes’ using
the left mouse button to confirm the deletion.
SCROLLING THROUGH SLOT POSITIONS
The left and right arrow boxes may be used to quickly scroll through
the complete list of slot positions.