Ap22, xpl-12 and xpl-22 expansion panels, Gooseneck mic type, Headset mic type – Clear-Com Eclipse-Omega User Manual
Page 140: Headset ptt function, Gooseneck mic type -30, Headset mic type -30, Headset ptt function -30
Clear-Com
Eclipse Configuration Software Instruction Manual
5 - 3 0
• PD4212E - PD4230E, PD4230VE may be fitted.
• PD4215E - PD4203E, PD4206E may be fitted.
• PD4222E - PD4230E, PD4230VE may be fitted
• PD4224E - PD4203E, PD4206E may be fitted.
• PD4226E - PD4203E, PD4206E may be fitted.
• PD4294E - no expansion panels are supported.
AP22, XPL-12 and XPL-22 Expansion Panels
If AP-22, XPL-12 and XPL-22 expansion panels are used in a mixed
configuration i.e. more than one type of expansion panel is attached to
the host panel the different panel types must be separated rather than
mixed in the chain. For example if a mixture of four AP22 and XPL-22
panels are used with a host panel the all the AP-22 panels must be
grouped together and all the XPL-22 panels must be grouped together.
If the expansion panel types are mixed the panel keys may be
incorrectly assigned on the expansion panels. Examples are shown
below:
Host Panel -> AP22 -> AP22 -> XPL-22 -> XPL-22 is correct
Host Panel -> XPL-22 -> XPL-22 -> AP22 -> AP22 is correct
Host Panel -> XPL-22 -> AP22 -> XPL-22 -> AP22 is incorrect
Host Panel -> XPL-22 ->AP22 -> XPL-22 is incorrect
Host Panel -> XPL-22 -> XPL-22 -> AP22 is correct
Gooseneck Mic Type
The Gooseneck Mic Type allows the type of panel microphone to be
configured. To set the microphone type highlight the item to allow the
drop-down menu to be displayed. The options for microphones are
Dynamic Balanced, Dynamic Unbalanced and Electret (default).
Note: Only available on V-Series panels.
Headset Mic Type
The Headset Mic Type allows the type of headset microphone to be
configured. To set the microphone type highlight the item to allow the
drop-down menu to be displayed. The options for headset
microphones are Dynamic Balanced, Dynamic Unbalanced (default)
and Electret. This setting applies to headset 1 and 2.
Note: Only available on V-Series panels.
Headset PTT Function
The Push to Talk function allows the action for PTT to be selected.
The options are No Function, Activate All Talk Keys and Activate
Two-Way Radio. The default is No Function. This function is triggered
by any of the PTT inputs on a panel.
The PTT switch can be in the
panel headset or connected
via the local options card.