Clear-Com Eclipse-Omega - Manual (Page 445)

Clear-Com
Eclipse Configuration Software Instruction Manual 1 5 - 1
SERIAL UPLOADER
ECS allows the operator to retrieve a configuration map file stored in a
matrix’s non-volatile memory and upload the file to a computer for
viewing, editing, or saving. However, this feature only works when the
computer on which ECS is installed is connected to the matrix via an
Ethernet network.
If the ECS computer is connected directly to the matrix with a serial
(null-modem) cable, it is possible to use the Serial Uploader program
on the Eclipse installation disk to upload a configuration.
INSTALLING THE SERIAL UPLOADER
1. Insert the Clear-Com Eclipse CD-ROM into the CD-ROM drive.
2. Right click on ‘My Computer and select ‘Explore’ from the short-cut
menu.
3. Click the ‘Serial Uploader’ folder on the CD-ROM disk to open the
folder.
4. Click ‘Setup.exe’ to launch the InstallShield Wizard.
Figure 15-1: Serial Uploader Installer Startup Screen
5. Click on the ‘Next’ button to start the installation.
6. Follow the instructions of the onscreen InstallShield Wizard to install
the Serial Uploader on the computer.
7. To start the program from the Start menu on the Windows desktop,
navigate to ‘All Programs’, then to ‘Clear-Com’, then to ‘Serial
Use Serial Uploader to
upload a configuration from
the matrix when the computer
is connected serially to the
matrix.
15