Clear-Com Eclipse-Omega - Manual (Page 447)

Clear-Com
Eclipse Configuration Software Instruction Manual 1 5 - 3
UPLOADING A CONFIGURATION FROM THE
MATRIX
1. If not already connected, connect the matrix to the computer with a
cross-over (null-modem) serial cable.
2. From the Start menu on the computer, navigate to ‘Clear-Com’, and
then to ‘Serial Uploader ’, and then to ‘Serial Uploader
’ again to start the program.
The Clear-Com Serial Configuration Uploader dialog box appears
onscreen.
Figure 15-2: Clear-Com Serial Configuration Uploader Dialog Box
3. From the COM port drop-down list select the COM port to which the
serial cable is connected on the computer.
4. Click Upload to start uploading the configuration from the matrix.
Figure 15-3: Clear-Com Serial Configuration Uploader Progress Bar