Clear-Com Eclipse-Omega - Manual (Page 303)

Clear-Com
Eclipse Configuration Software Instruction Manual 7 - 5 1
Figure 7-61: Label Window with Port and Name
The labels window will be redisplayed with the port and label
information columns added.
ASSIGNING LABELS
To assign a label to a given selector
1. Locate the mimic of the Panel to programme by either using the
scroll arrows or the drop down list box from the middle area of the
screen.
2. Locate the Talk or Listen Label (Red or Green columns) required to
be programmed onto the Panel from the bottom left area of the
screen
3. To select the required Label, drag the mouse curser until it is
positioned above either the Talk or Listen label. When the mouse is
dragged over any Label, the Label highlights to provide the user an
indication that this is the current Label.
4. Once the curser is positioned over the required Label, left click the
mouse button to select the Label.