Clear-Com Eclipse-Omega - Manual (Page 240)

Clear-Com
Eclipse Configuration Software Instruction Manual
6 - 8
Figure 6-13: Panel Status Filtering
To filter panels by name enter the panel IP address, MAC address or
panel ID into the ‘Name Search’ box and click on the ‘Discover’ button
to refresh the display.
ASSIGNING A PANEL TO AN IVC-32 PORT
Panels can be assigned to ports on an IVC-32 card by dragging the
panel icon from the IP Panels pane to the assignment zone on the
IVC-32 card. Panels can also be moved from one IVC-32 port to
another. The results of the action will depend on the status of the
panel.
• Moving (assigning) a panel to a port on the IVC-32 card will only
adjust the current user ID in the panel if no user ID in the panel
currently exists. In this case a unique user ID is used as the user
ID of the connection. The password on the connection is left
blank. This initial state of the panel represented by the blue color
and indicates that the panel is known to be out of use and ready
for assignment.
• If a current user ID setting already exists on a panel it is not
adjusted during an assignment. If the panel is used in another
currently inactive Eclipse configuration this association would now
have been broken.
• When a panel is not used by the current configuration but has a
user ID (even though this may be a stale configuration) and the
matrix IP address is in the current configuration the panel is