Clear-Com Eclipse-Omega - Manual (Page 253)

Clear-Com
Eclipse Configuration Software Instruction Manual 7 - 1
PANEL
PROGRAMMING
From the Panel Programming screen (in the Configuration menu), the
ECS operator can assign talk and listen labels to panel keys, assign
labels to expansion panel keys, configure assignment panels, stack
keys and set key specific functions.
Figure 7-1: Panel Programming Screen
The screen is split into 4 areas.
The top area provides scroll arrows and a drop down list of all intercom
panels. The middle area provides a mimic of the intercom panels and
is the area where labels are programmed onto the panel selectors.
Also this area provides access to configure Expansion Panels to host
Panels.
Note: Expansion panels can only be added or removed in the
‘Cards and Ports’ function.
The bottom left area provides a complete list of all the labels in the
system available to programme onto panel selectors.
The bottom right area provides an area where stacked keys can be
configured or specific key actions can be set.
7