Clear-Com Eclipse-Omega - Manual (Page 318)

Clear-Com
Eclipse Configuration Software Instruction Manual
7 - 6 6
GENERAL PANEL SETUPS
STACKED KEYS
Stacked Keys functionality is the ability to add more than one Talk
label to a single selector of an intercom panel.
Figure 7-77: Stacked Keys Screen
CREATING A STACKED KEY
1. To create a stacked key, open the Panel Programming screen.
2. Select the panel where the stacked key is to be created
3. Either programme a Talk label to the panel or identify a Talk label
that has already been programmed onto the panel.
4. On the mimic of the panel, place the mouse cursor over the required
Talk label.
5. Double Click the left mouse button on the Talk label.
6. The Talk Label appears in the Stacked Key area, which is the
bottom right window.
7. Drag the mouse cursor over to the Talk Labels window
8. Left Click the mouse button over the required Label
9. In the Stacked Key window, select the ‘Add Selected Label’ button.
10. Repeat steps 7 to 9 for the required amount of Labels.
Note: On an ICS- 2003 a talk to a stacked key of which a member
is a local IFB to the 2003 results in the ICS-2003 reporting
that Communications are being monitored by the ICS-2003
and the audio is not cut.