Clear-Com Eclipse-Omega - Manual (Page 177)

Clear-Com
Eclipse Configuration Software Instruction Manual 5 - 6 7
Figure 5-40: Manual IP Address Entry
IP Address
Static IP address of the LMC-64 card, assigned by IT or the Network
Administrator. This will be used by Production Maestro clients to
communicate with the LMC-64 card.
Important
It is important to ensure that the LMC-64 card IP address does not
clash with any other IP address on the network (another device is
using the same IP address). If there is an IP address clash the
Production Maestro clients may lose audio meter data. If the LMC-64
card IP address clashes it may also cause the LMC-64 card to crash.
Subnet Mask
Subnet mask used by the LMC-64 card to define the address range the
card can access. Typically this will be assigned by IT or the Network
Administrator. The default is 255.255.0.0.
Default Gateway
The address of the gateway (router) to be used to communicate with
Production Maestro clients over a wider IP network. This address is
optional but if used must fall within the address range defined by the
subnet mask.
External IP Address
If the matrix is operating behind a firewall then port address forwarding
can be used to expose a LAN-connected device to the outside world.
Typically this will be assigned by IT or the Network Administrator.