Clear-Com Eclipse-Omega - Manual (Page 130)

Clear-Com
Eclipse Configuration Software Instruction Manual
5 - 2 0
AUDIBLE ALERTS
The various configurable audible alerts on panels are as follows: Call
Signal Tone, Change or Error Tones and Monitoring Tones.
Call Signal Tone
When checked the Call Signal Tone will enable an audible tone when a
call signal is received by the panel. The call signal can be used to
signal an event on another panel. The default setting is disabled.
Change Tones
When checked the Change Tones will announce whenever the
configuration for that panel has changed or when there is an error on
the panel. When unchecked the Change Tones is disabled. The
default setting is disabled.
Monitoring Tones
Monitoring tones when checked enables the panel tone when another
panel activates a listen to the first panel. If the box is unchecked the
Monitoring tone is disabled. The default is disabled.
Applies to:
On V-Series, Concert, ICS 2003, ICS 102, i-Station, ICS 1008, ICS
1016, ICS 52, ICS 62, ICS 92.
BASIC SETTINGS
Description
The Description field in the port settings table.
Engineer Comments
A scratchpad for engineers to record any relevant information about
the port or device.
Listen Label
The Listen Label specified in the port settings table.
Master Port
This option defines which panel attached via an AES-6-CX interface
the Aux Port is paired with. Selecting the Master Port option will
display a drop-down menu of all the available panels and the user
should select the panel that this port is attached to via the AES-6-CX
interface.