Clear-Com Eclipse-Omega - Manual (Page 236)

Clear-Com
Eclipse Configuration Software Instruction Manual
6 - 4
• Amber - panel has been discovered that is configured in this
configuration but is not logged in.
• Grey - panel has been discovered with an IP address that is not
for the matrix in this configuration. The panel may be configured
for another matrix and may be logged in to that matrix.
• Red - panel has been discovered that is not in one of the other
states. The panel may be configured for this matrix but is not in
the current configuration.
• Mauve - panel has been discovered but the panel status is
undetermined. Panels may be displayed in this color briefly
during discovery until the panel status is established and the color
will then change to reflect the panel status.
Clicking on the left button of a panel entry will display an ‘Identify
Panel’ button.
Figure 6-6: Identify Panel Button
Clicking on the identify button will request that the panel enters its
‘IDENTIFYME’ mode with the panel LEDs flashing red across the
panel. The ‘Identify Panel’ text will be displayed in bold and a red bar
will move across the button to show that the mode is active.
Figure 6-7: Identify Function Active
Clicking on the button again will end the identify mode.
Clicking on the right button will display a list of all the available
information about the panel.