Clear-Com Eclipse-Omega - Manual (Page 317)

Clear-Com
Eclipse Configuration Software Instruction Manual 7 - 6 5
CONFIGURING A PD4216 INTERFACE
PANEL
The PD4216 Interface panel will drive four PD4230 or PD4230V
expansion panels while emulating a PD4222 panel. This allows ECS
to configure the expansion panels using the PD4222 configuration
procedure; so a port connected to a PD4216 Interface panel should be
set up as a PD4222.
In order to define the keys on the PD4230 panels the PD4216 is set up
as a PD4222 with the keys divided into four banks of six corresponding
to the four PD4230 panels.
Figure 7-76: Configuring PD4216 Interface Panel
The keys on the main and shift pages on the “PD4222” will correspond
to the keys on the main and shift pages of the PD4230 panels. When
pressed they will function as if they were on a PD4222 panel.
It should be noted that where PD4230 panels are used in this way they
are not considered to be acting as expansion panels and so should not
be configured as such in the Advanced Settings Panel Options.