Clear-Com Eclipse-Omega - Manual (Page 199)

Clear-Com
Eclipse Configuration Software Instruction Manual 5 - 8 9
Figure 5-22: Party Line Soft Mode Options
PARTY LINE TALLIES
To enable/disable Tallies
1. Open the Party Line screen by selecting the ‘Party Lines’ link on the
Configuration menu.
2. Create a Party Line or select a Party Line that was been previously
created.
3. Expand the ‘Tallies’ item in the ‘Properties’ window.
4. Select the ‘In Use Tally’ item in the ‘Tallies’ list.
5. Select the drop down arrow and select the required status.
Figure 5-23: Party Line Tallies