Clear-Com Eclipse-Omega - Manual (Page 352)

Clear-Com
Eclipse Configuration Software Instruction Manual
1 0 - 2
Figure 10-2: Configuration Properties Dialogue
To set or change the password for a configuration type the password
into the ‘Password’ field and then retype in the ‘Confirm password’
field. Then click on the ‘Update Details’ to add the password to the
configuration. The configuration must be saved and closed before the
password becomes operative.
ECS users with Admin rights can always open a configuration
regardless of whether a password has been set and reset the
password if required. If an ECS user without Admin rights opens a
password protected configuration they will be asked for the password.
Figure 10-3: Configuration Password Entry
The correct password must be entered to open the configuration.
Once the configuration has been opened by an ECS user with User
rights that user may then change or remove the password.
The configuration password may be removed by opening the
configuration properties and clearing both the ‘Password’ and ‘Confirm
password’ fields and then saving the configuration. The next time the
configuration is opened it will no longer be password protected.