Figure 6-8 ip enabled panel info -5 – Clear-Com Eclipse-Omega User Manual
Page 237
Clear-Com
Eclipse Configuration Software Instruction Manual
6 - 5
Figure 6-8: IP Enabled Panel Info
The panel information displayed shows the following:
• Panel - panel type.
• MAC - panel MAC address.
• Connection - the protocol used in the panel connection.
• Connected - the length of time the panel has been connected
without a reset.
• Powered - the length of time since the panel was last powered up.
The IP settings displayed are the same as those set on the panel using
the panel IP setup menus (see V-series manual).
• Login IP - the IP address of the IVC-32 card that the panel will try
to log in to.
• Login Port - the port the panel will use to log in to the IVC-32 card.
• DHCP Enabled - whether the panel should obtain an address from
a DHCP server or use a preset address.
• Connection - the type of connection; WAN, LAN or Internet.