Clear-Com Eclipse-Omega - Manual (Page 440)

Clear-Com
Eclipse Configuration Software Instruction Manual
1 4 - 1 0
Ethernet Stats
Output the statistics of ethernet transactions logged such as packet
losses etc to the matrix event log.
Change IP Address
This function allows the primary and secondary IP address of the
target matrix to be set. These addresses correspond to the LAN1 and
LAN2 connectors on the rear of the CPU card (see the Omega or
Median Matrix manuals) or the Eclipse-32 or Eclipse PiCo unit (LAN 1
only). Please see for details“Changing Matrix IP Address” on
page 3-8.
Figure 14-10: IP Address Setup Display
Select interface 1 or 2 (LAN1 or LAN2 port) and enter the required IP
address, subnet mask and default gateway and click on ‘Send’ to
update the matrix.
Note: Changing the IP address parameters may result in the ECS
PC losing contact with the matrix and may require the
ethernet configuration of the PC to be changed.
Custom
Allows request parameters to be entered manually for downloading to
the matrix.
AUDIO ALERTS
This option in the ‘Properties’ pane allows audio alert sounds to be set
up for the three message types of Critical, Warning and Informatory.
The audio alerts are .wav files and the default is the standard Windows