Clear-Com Eclipse-Omega - Manual (Page 293)

Clear-Com
Eclipse Configuration Software Instruction Manual 7 - 4 1
Figure 7-50: Select an expansion panel from the drop-down list
Select the required expansion panel from the expansion panel list.
The expansion panel is displayed on the screen and labels may be
assigned to the panel as usual. The AP22, Xpl12 and Xpl22 expansion
panels connects to the accessories port of an ICS 2003, ICS 92/52, or
ICS 102/62 panel.
When assigning labels to ECS expansion panels in Panel
programming note that two labels i.e. Talk and Listen can be assigned
to keys on Xpl12 and Xpl22 expansion panels as these are lever key
panels.
Note: Expansion panels are deleted using the ’Cards and Ports’
editor.
ASSIGNMENT PANEL PROGRAMMING
An assignment panel allows the panel operator to assign a program
audio source, or sources, to an IFB destination. The panel operator
can also add and remove members from party lines and fixed groups
with an assignment panel. ICS assignment panels are ICS 2003, ICS
52, ICS 92 and AP22 expansion panels when connected to a master
panel that is an assignment panel. Xpl12 and Xpl22 expansion panels
cannot be used as assignment panels.
Assignment panels operate in one of four modes:
Main Panel List Expansion Panel List