Clear-Com Eclipse-Omega - Manual (Page 306)

Clear-Com
Eclipse Configuration Software Instruction Manual
7 - 5 4
options menu and then select the ‘Activation’ item to display the
activation options.
Figure 7-65: Key Assignment Menu
The activation options are: Talk, Listen, Talk and Listen, Talk and
Forced Listen or Dual Talk and Listen.
• Talk sets a talk from the i-station to a destination with no
automatic listen to the destination.
• Listen sets a key to listen to the source without talking to the
destination at the same time. Use as a monitor key. Press
the volume level up/down buttons under the display to
increase listen level.
• Talk and Listen sets a talk key with listen. Press the volume
level up/down buttons under the display to increase or mute
the listen level.
• Talk and Forced Listen sets a talk key with permanently made
listen. Press the volume level up/down buttons under the
display to increase or mute the listen level.
• Dual talk and Listen sets a Dual talk and listen key. This
makes the pushbutton activate a Talk and Listen on a press
and hold or latch a Listen with a short press and release (less
than 200ms) on the same pushbutton.
Local Assignment
Click on the ‘Local Assignment’ entry to display the available options
for local key assignment. The options are to allow local key
assignment to overwrite the selected key or to disallow local key
assignment to overwrite the selected key. This permits the system
administrator to limit the keys a panel operator can overwrite when
locally assigning keys by Fast Key Assign (V-Series only) or by Local
Key Assignment (on panels supporting this facility).